There has been a recent explosion in open source cad options.
fluidcad appears to be a remarkably good option now - particularly for something that only started development about a year ago.
I have used freecad, solvespace and onshape for at least a hundred hours each to make some reasonably complex parts. fluidcad resolves pretty much everything I found painful about those options.
I have some more limited experience with build123d which is also nice, but just not as easy and interactive as fluidcad.
Fluidcad provides normal interactive 3d cad interface with tools like extrudes/revolves/sketches but explicitly generates code as an intermediate step to constructing geometry and the code can be edited and refactored easily.
The linking between the code and the gui works remarkably well in practice.
It’s far easier to manage parameters and constraints in fluidcad where they are written out explicitly and can be edited vs what happened in a gui-only interface like Onshape.
If you’re playing around with a semi-constrained sketch to understand kinematics onshape tends to “helpfully” add random constraints which is really annoying to identify and correct. In fluidcad everything is way more explicit and visible and clear.
I have only spent about 5 hours using fluidcad but it looks remarkably useful despite some minor rough edges. It’s pretty much exactly what I wanted onshape or build123d to be.
Solvespace is a really beautiful piece of software but quite limited. fluidcad has the same sort of nice vibes as solvespace but is way more powerful.
Not sure what the issue is. I did see that a couple of times on a slow windows vm but it stopped happening after I reopened the app.
I tried it again a few days later on a Mac and went through a couple of the tutorials and then did a couple of hours of actual work without any major issues.
So yeah, definitely some rough edges at the moment, but once I got past those, the overall experience was surprisingly good.
MangoJelly’s FreeCAD courses on YouTube took me from zero to dangerous enough to design my own prints. I appreciated his approach of modeling a part and then modeling it again with an improved method.
I've watched a fair number of these, but I always get hung up on some tiny little interface difference which confuses me.
Even bought a book which was purportedly for 1.1 (according to a bar across a corner of the cover), but when I got it, the text referenced 1.0 and the screengrabs were also for the older version.
I am hopeful that the UI will settle down sufficiently with the nascent 26.3 that learning materials will catch up.
For phyaucal engineering, Cad wasn't particularly the bottleneck ffrom my perspective as we were able to teach young kids to cad at a pretty competent level.
The rigor behind a functional design needs to consider physics, manufacturability, and real engineering was what is considered good or great CAD
These are great! I've been using CAD for the better part of three decades, from AutoCAD R14 to 3DS Max, SketchUP, Rhino 3D, Solidworks, Vectorworks, and now OnShape.
Parametric solid modeling (OnShape in particular) is by far the most enjoyable (for me) of the conceptual frameworks which transform ideas in to geometry, though it seems one of the most difficult to intuit for newcomers.
I highly recommend anyone interested give it a shot, there's never been a better time with more resources available to take advantage of the incredible capabilities of these tools.
I've done some CAD training online (also onshape) and have gotten pretty handy and designed some things for my 3d printer. I can make whatever shapes but it all looks like crap and wilts quickly under load. I'd love any advice or resources for actually understanding functional and aesthetic principles. Or does it just come with experience?
I’ve used FreeCAD and now mainly use Fusion360, but am absolutely fed up with Fusion’s performance and terrible cloud setup. Is OnShape comparable on its free plan?
I wish there was a way to have at least a small number of projects private with OnShape's free plan. With everything public I can't use existing models I have the right to use, but not to re-publish, that's very limiting. Their cheapest paid plan is way more than I could justify for occasional non-commercial hobbyist modelling.
There doesn't seem to be anything but Fusion 360 that's viable for hobbyists, and I believe that limits the number of projects to some crazy low number.
There is FreeCAD, and I really do like the idea of open source CAD, but I don't understand how people get anything just the slightest bit complex done on it given how rudimentary and anal its constraint solver is. Dozens of hours of practice in it's still just painful in a way no other solver I've used has ever been, sucks all of the joy right out of the process. It's really not for me.
I'm stuck with SolveSpace for the time being, which is much much nicer to use than FreeCAD, but extremely limited feature-wise, and it has a bunch of annoying bugs.
I get why the big commercial players do it this way, but it sucks that there isn't some affordable non-commercial option for one of the established tools.
I learned CAD back in 2016 from a guy on YouTube with a thick german accent. Ever couple of years I've needed to do something w/ some sort of CAD, mostly FreeCAD recently. It's nice to know I've not forgotten everything, but it's also interesting to play with the variety of MCPs and agent tools for CAD out there. Dictating that I want something to have holes at such and such a size, and spread 20 degrees apart and so on is interesting, and feels like essentially the same thing, but with a very specific image of what I want in my minds eye.
The parts of this course seem generally the same to what I learned (although without the thick german accent) and probably translate equally well to the agent/mcp UX for CAD.
I'm interested in 3D modelling, and I'm wondering if something like this would be adjacent enough to offer a new perspective but still be useful in art rather than just technical CAD?
Despite AI being able to do all this already, I still think it’s a very interesting skill to learn because almost all products around you are designed this way. For better or for worse, you will be able to see how CAD affected the design of products you touch or see.
Do you have an example? Last I checked, AI did bad meshes and didn't use common techniques. I believe it was back when stable diffusion was employed, though.
Over this past weekend I had Claude Opus 5.5 medium design some components using openscad, combined with some hobby servos and an arduino to make a robot arm, and then I printed them on my 3d printer and assembled them.
Granted, it wasn't perfect, but it got pretty close, and with some light iterating, the finished result is not bad. Giving it access to prusaslicer as a tool helped it catch some common mistakes like overhang early too.
Polygonal geometry is harder for GenAI to do because it’s still largely diffusion based to look like an object and topology is just a polygonal projection over it. It’s roughly equivalent to the diffusion model generating the image inputs to photogrammetry (not quite but a trivialized explanation)
Meanwhile CAD is represented as a series of B-rep surfaces and operations. Both are largely more procedural and more akin to a programming language for models. Therefore it’s easier for an LLM to drive something towards an end result.
Then the CAD engines tessellator generates the polygons, but topology is not super important for CAD.
The best LLM CAD results I’ve seen even in academia are largely simplistic still though. The more data you put in , the better it’ll be able to match that but it’s sort of like giving it a very clear set of functions it can do to make something.
Is there any possibility of it getting updated for opensource options? FreeCAD would seem to be a good fit --- I'd love to see Dune 3D get some traction as well, and I'm very hopeful for the next version of SolveSpace which will add parameterization.
Just yesterday I setup Claude and Claude duet so I can just snap photos of a caliper in multiple ways around an object and let opus auto generate the model. Slice it in orcaslicer. Send to printer on LAN.
Anything else I should know as I don’t want to have to do anything more than this to print items I need around the house
I want to get a flatbed scanner to take orthographic photos of items that I want precise measurements for to eliminate the caliper process, maybe that?
Photogrammetry is the way. Many open and closed implementations. Higher resolution than FaceID and LiDAR sensors on iPhone. Keep the light and object in the same place; move camera around. Much higher fidelity.
If you are using Solidworks, I highly recommend Vertanux's SW course on YouTube. It's free, has example problems, and helped me really grasp the broad basics from bottoms up to tops-down assembly, drawings, etc.
Probably a useful intro tutorial for basic traditional CAD, but I don't see any mention of photo to 3D or AI assisted CAD. Workflows must be very different now.
Not really all that different so far, even in companies where AI is extremely encouraged. From what I've seen, AI can help with tangential tasks to the actual design (exploded views, interference checks, probably basic drafting layout, etc) but it's still not that great at designing mechanisms or things that will be "used". By which I mean that AI doesn't have the same understandings as a human designer for how an item is intended to be used or operated.
I can second this. I'm at an extremely AI-forward company, and though there are very aggressive internal efforts to figure out AI-first CAD workflows, it's the general consensus that the technology just isn't quite there yet.
I'm very curious about this. I don't know anything about this space, but saw that OpenAI was advertising their mechanical engineering capabilities for the 6.2 release. How large of a part of the job is what AI can do at the moment? Do you feel a big jump in capabilities on each model release?
I have been building objects in Satisfactory lately and it’s the first interface I have found that seems really intuitive for making 3d shapes. Is there any modeling software that works this way (like an fps with build/delete gun) or must I just bite the bullet and adapt to blender or fusion or something? A long time ago I figured out sketchup but it turned into some sort of cloud garbage now and even back then I recall it being slightly clunky.
Not exactly what you are looking for, but I recommend following the Solvespace tutorial. It's short and simple and SolveSpace is a small download with a non-overwhelming number of features. It is harder to get lost in SolveSpace than in FreeCAD which is an absolute maze of "workbenches" and glued together features.
It is worth getting comfy with parametric sketch-based CAD because it's so powerful. It feels a lot like programming, really, in that by taking a good approach to modeling a part you can reduce or eliminate the amount of repetitive labor and make-this-line-up-with-that housekeeping you have to do.
And the fundamentals transfer over to FreeCAD, Fusion, Solidworks, etc. pretty easily in the same way that once you know Java you can learn Python, C#, etc.
There has been a recent explosion in open source cad options.
fluidcad appears to be a remarkably good option now - particularly for something that only started development about a year ago.
I have used freecad, solvespace and onshape for at least a hundred hours each to make some reasonably complex parts. fluidcad resolves pretty much everything I found painful about those options.
I have some more limited experience with build123d which is also nice, but just not as easy and interactive as fluidcad.
Fluidcad provides normal interactive 3d cad interface with tools like extrudes/revolves/sketches but explicitly generates code as an intermediate step to constructing geometry and the code can be edited and refactored easily.
The linking between the code and the gui works remarkably well in practice.
It’s far easier to manage parameters and constraints in fluidcad where they are written out explicitly and can be edited vs what happened in a gui-only interface like Onshape.
If you’re playing around with a semi-constrained sketch to understand kinematics onshape tends to “helpfully” add random constraints which is really annoying to identify and correct. In fluidcad everything is way more explicit and visible and clear.
I have only spent about 5 hours using fluidcad but it looks remarkably useful despite some minor rough edges. It’s pretty much exactly what I wanted onshape or build123d to be.
Solvespace is a really beautiful piece of software but quite limited. fluidcad has the same sort of nice vibes as solvespace but is way more powerful.
FluidCAD looks very interesting, but when I tried it I got:
>The FluidCAD engine did not start within 30s.
which is an open issue: https://github.com/Fluid-CAD/FluidCAD/issues/80
> which is an open issue
> closed this as completedon Oct 5
Hmmm?
Not sure what the issue is. I did see that a couple of times on a slow windows vm but it stopped happening after I reopened the app.
I tried it again a few days later on a Mac and went through a couple of the tutorials and then did a couple of hours of actual work without any major issues.
So yeah, definitely some rough edges at the moment, but once I got past those, the overall experience was surprisingly good.
>> There has been a recent explosion in open source cad options.
Yea, especially more so with ArtCraft cloning the more expensive stuff.
It would not surprise me to see ArtCraft versions of DS CATIA/MatLab/Wolfram that can compete with the originals, in the near future.
MangoJelly’s FreeCAD courses on YouTube took me from zero to dangerous enough to design my own prints. I appreciated his approach of modeling a part and then modeling it again with an improved method.
https://youtube.com/@MangoJellySolutions/
I've watched a fair number of these, but I always get hung up on some tiny little interface difference which confuses me.
Even bought a book which was purportedly for 1.1 (according to a bar across a corner of the cover), but when I got it, the text referenced 1.0 and the screengrabs were also for the older version.
I am hopeful that the UI will settle down sufficiently with the nascent 26.3 that learning materials will catch up.
For phyaucal engineering, Cad wasn't particularly the bottleneck ffrom my perspective as we were able to teach young kids to cad at a pretty competent level.
The rigor behind a functional design needs to consider physics, manufacturability, and real engineering was what is considered good or great CAD
These are great! I've been using CAD for the better part of three decades, from AutoCAD R14 to 3DS Max, SketchUP, Rhino 3D, Solidworks, Vectorworks, and now OnShape.
Parametric solid modeling (OnShape in particular) is by far the most enjoyable (for me) of the conceptual frameworks which transform ideas in to geometry, though it seems one of the most difficult to intuit for newcomers.
I highly recommend anyone interested give it a shot, there's never been a better time with more resources available to take advantage of the incredible capabilities of these tools.
I've done some CAD training online (also onshape) and have gotten pretty handy and designed some things for my 3d printer. I can make whatever shapes but it all looks like crap and wilts quickly under load. I'd love any advice or resources for actually understanding functional and aesthetic principles. Or does it just come with experience?
I’ve used FreeCAD and now mainly use Fusion360, but am absolutely fed up with Fusion’s performance and terrible cloud setup. Is OnShape comparable on its free plan?
I wish there was a way to have at least a small number of projects private with OnShape's free plan. With everything public I can't use existing models I have the right to use, but not to re-publish, that's very limiting. Their cheapest paid plan is way more than I could justify for occasional non-commercial hobbyist modelling.
There doesn't seem to be anything but Fusion 360 that's viable for hobbyists, and I believe that limits the number of projects to some crazy low number.
There is FreeCAD, and I really do like the idea of open source CAD, but I don't understand how people get anything just the slightest bit complex done on it given how rudimentary and anal its constraint solver is. Dozens of hours of practice in it's still just painful in a way no other solver I've used has ever been, sucks all of the joy right out of the process. It's really not for me.
I'm stuck with SolveSpace for the time being, which is much much nicer to use than FreeCAD, but extremely limited feature-wise, and it has a bunch of annoying bugs.
I get why the big commercial players do it this way, but it sucks that there isn't some affordable non-commercial option for one of the established tools.
If you want something in-between FreeCAD and SolveSpace there is Dune 3D:
https://dune3d.org/
which has been discussed here previously:
https://news.ycombinator.com/item?id=37979758
https://news.ycombinator.com/item?id=40228068
https://news.ycombinator.com/item?id=47475417
I learned CAD back in 2016 from a guy on YouTube with a thick german accent. Ever couple of years I've needed to do something w/ some sort of CAD, mostly FreeCAD recently. It's nice to know I've not forgotten everything, but it's also interesting to play with the variety of MCPs and agent tools for CAD out there. Dictating that I want something to have holes at such and such a size, and spread 20 degrees apart and so on is interesting, and feels like essentially the same thing, but with a very specific image of what I want in my minds eye.
The parts of this course seem generally the same to what I learned (although without the thick german accent) and probably translate equally well to the agent/mcp UX for CAD.
I'm interested in 3D modelling, and I'm wondering if something like this would be adjacent enough to offer a new perspective but still be useful in art rather than just technical CAD?
Despite AI being able to do all this already, I still think it’s a very interesting skill to learn because almost all products around you are designed this way. For better or for worse, you will be able to see how CAD affected the design of products you touch or see.
Do you have an example? Last I checked, AI did bad meshes and didn't use common techniques. I believe it was back when stable diffusion was employed, though.
Over this past weekend I had Claude Opus 5.5 medium design some components using openscad, combined with some hobby servos and an arduino to make a robot arm, and then I printed them on my 3d printer and assembled them.
Granted, it wasn't perfect, but it got pretty close, and with some light iterating, the finished result is not bad. Giving it access to prusaslicer as a tool helped it catch some common mistakes like overhang early too.
https://github.com/AdamRhodes/robot-arm-public/tree/main/par...
Checkout some of the stls in the repo if you are curious the kinds of stuff it can already do fairly well.
I'd recommend trying it again, it has gotten significantly better since the last time I tried it about a year ago.
CAD isn’t polygonal geometry be definition.
Polygonal geometry is harder for GenAI to do because it’s still largely diffusion based to look like an object and topology is just a polygonal projection over it. It’s roughly equivalent to the diffusion model generating the image inputs to photogrammetry (not quite but a trivialized explanation)
Meanwhile CAD is represented as a series of B-rep surfaces and operations. Both are largely more procedural and more akin to a programming language for models. Therefore it’s easier for an LLM to drive something towards an end result.
Then the CAD engines tessellator generates the polygons, but topology is not super important for CAD.
The best LLM CAD results I’ve seen even in academia are largely simplistic still though. The more data you put in , the better it’ll be able to match that but it’s sort of like giving it a very clear set of functions it can do to make something.
direct to lecture videos, https://www.youtube.com/playlist?list=PLxiALKuvAodc32WZI0UUX...
Bless. Ty.
So this has versions for:
- Solidworks
- Creo
- Fusion
- Inventor
- OnShape
- NX
Is there any possibility of it getting updated for opensource options? FreeCAD would seem to be a good fit --- I'd love to see Dune 3D get some traction as well, and I'm very hopeful for the next version of SolveSpace which will add parameterization.
This is weird timing.
Just yesterday I setup Claude and Claude duet so I can just snap photos of a caliper in multiple ways around an object and let opus auto generate the model. Slice it in orcaslicer. Send to printer on LAN.
Anything else I should know as I don’t want to have to do anything more than this to print items I need around the house
I want to get a flatbed scanner to take orthographic photos of items that I want precise measurements for to eliminate the caliper process, maybe that?
Apparently iPhone lidar isn’t precise enough or else that would be neat to scan quick and instant print. Maybe it’s close enough for certain things.
Photogrammetry is the way. Many open and closed implementations. Higher resolution than FaceID and LiDAR sensors on iPhone. Keep the light and object in the same place; move camera around. Much higher fidelity.
That gives you a mesh, but for some applications (not the OP's) you might still want a BRep model, which is where the AI is still useful.
I don't see DS CATIA on the site? :(
If you are using Solidworks, I highly recommend Vertanux's SW course on YouTube. It's free, has example problems, and helped me really grasp the broad basics from bottoms up to tops-down assembly, drawings, etc.
https://youtube.com/playlist?list=PLROUP1bV8REQmZgDTTJ0JCanX...
Probably a useful intro tutorial for basic traditional CAD, but I don't see any mention of photo to 3D or AI assisted CAD. Workflows must be very different now.
Not really all that different so far, even in companies where AI is extremely encouraged. From what I've seen, AI can help with tangential tasks to the actual design (exploded views, interference checks, probably basic drafting layout, etc) but it's still not that great at designing mechanisms or things that will be "used". By which I mean that AI doesn't have the same understandings as a human designer for how an item is intended to be used or operated.
I can second this. I'm at an extremely AI-forward company, and though there are very aggressive internal efforts to figure out AI-first CAD workflows, it's the general consensus that the technology just isn't quite there yet.
Just curious, what do you think is lacking in the current AI-first CAD workflow that makes it less than production ready?
Full disclosure, I'm currently trying to build something to solve this and it would be nice to get some market feedback.
I'm very curious about this. I don't know anything about this space, but saw that OpenAI was advertising their mechanical engineering capabilities for the 6.2 release. How large of a part of the job is what AI can do at the moment? Do you feel a big jump in capabilities on each model release?
that's because those things are not yet viable
I have been building objects in Satisfactory lately and it’s the first interface I have found that seems really intuitive for making 3d shapes. Is there any modeling software that works this way (like an fps with build/delete gun) or must I just bite the bullet and adapt to blender or fusion or something? A long time ago I figured out sketchup but it turned into some sort of cloud garbage now and even back then I recall it being slightly clunky.
Not exactly what you are looking for, but I recommend following the Solvespace tutorial. It's short and simple and SolveSpace is a small download with a non-overwhelming number of features. It is harder to get lost in SolveSpace than in FreeCAD which is an absolute maze of "workbenches" and glued together features.
https://solvespace.com/bracket.pl
It is worth getting comfy with parametric sketch-based CAD because it's so powerful. It feels a lot like programming, really, in that by taking a good approach to modeling a part you can reduce or eliminate the amount of repetitive labor and make-this-line-up-with-that housekeeping you have to do.
And the fundamentals transfer over to FreeCAD, Fusion, Solidworks, etc. pretty easily in the same way that once you know Java you can learn Python, C#, etc.
I really do prefer using a programming language for describing 3D models. Like openscad.
Yes, the openscad language is weird. Considering switching to python.
Do you relate?
If you like OpenSCAD, but want to use Python, then PythonSCAD, which just updated to version 1.2 is what you are looking for:
https://pythonscad.org/
The same answer to everything else: ask Claude to do it
Hey Claude you got freecad and Isaac sim, shame the establishment. Build me a digital twin worthy of Mordor.